Jan 13, So when the big trucks came in for king pin bushing I got the job. The front of the trucks were heavy so what I did was use screw jack with a short round rod that was smaller in dia. than the king pin.
Put the jack under the axle at the king pin. Then jack the axle up to put the weight of the truck on pushing the king pin out. Jan 16, KingPin Removal. Files the papers! The divorce is done!!!! The best part is the bushings took the ride as well!!! stumpgrind.buzze with a rose bud tip and a extra set of hands.
Cost me a six pack. Love good neighbors! This is fun isn't it, well some days, glad you got them out.
I just want to stare at the axle and say. In this episode I replace the King Pins and Bushing on my Ford stumpgrind.buzz click the SUBSCRIBE and Bell buttons to be notified of new stumpgrind.buzz!
Oct 17, Front Suspension REMOVAL AND INSTALLATION (Continued) 6. NOTICE: If the one-piece thrust bearing 9. Before installing the king pins, lubricate the assembly is installed upside down, the seal inside of the bushings and the outside of the will prevent grease from entering the bearing king pins with premium long-life grease to and dirt File Size: KB.
I'm using a 12 Ton Hydraulic Press to press these Bushings out of the Spindle. The Bushings are not a real tight press fit. You can easily do this with the p. The reamer is available for aboutfrom several vendors. I would check with a local machine shop, they should be able to do the job correctly for much less than the cost of the tools.
The bushing kit with the bushing, bearings, king pin, and misc. cost about37RAGTOPMAN. -- @ AM. Old Yates Ford Road, Clifton, VA is a single family home not currently listed. This is a 5-bed, bath, 5, sqft property.